 |
Higher Tensile Strength and Good abrasion resistance to withstand higher wear rate which helps to carry |
| |
highly abrasive and sharp materials . The special silica based Synthetic Rubber Formulation ensures a very |
| |
good cut growth resistance to the cover. |
|
Low Elongation : Our in house availability of fabric combined state of the art post tension device helps us |
| |
to restrict the elongation to the required minimum. |
|
Good Impact resistance :Even though it is highly recommended to use a BREAKER Ply where the impact of |
| |
falling material is high , our special weaving techniques employed for fabrics ensure a very good impact |
| |
resistance for the belt. |
|
Moisture resistance : The special compounds applied to the edges of the CUT EDGE belts ensures that |
| |
moisture does not effect the belts in any severe climatic conditions. |
|
Higher Weft Strength : A very high weft strength much above the specified norms allows a very good |
| |
splicing including the use of mechanical fasteners. |
|
Higher Adhesion : Dipping of the Fabric in Rubber solution before processing which is speciality of only |
| |
SEMPERTRANS NIRLON ensures a higher level of adhesion enhancing the life of the belt by many miles |
